S.E.S shift light V1.2

The sequential shift light is intended for the track enthusiast drivers, road course or drag races when you are in an extremely loud environment (mostly cars with straight pipe exhaust) and during the daylight specially when the sun shines in front of you and can’t see you cluster properly or your digital gauges.
The sequential shift light has a powerful LED,s intended to use during the daylight with dual adjustable brightness, you can adjust the bright for the daylight and another custom setting for the night.  How does it work? The sequential shift light has a special input connected to your low beams, when you switch your low beams ON the LED,s. get dimed.
Here’s some features:
*Dual programmable brightness.
*Auto power off. (if the module does not detect any RPM it shuts off and then automatically turns back ON when it detects any RPM
*Adjustable shift light: You can adjust the RPM range and the color for the shift light flashes.
*Adjustable RPM starting point: The module can be adjusted when the lights start to light it up. Let’s say I adjusted the module at 2000 RPM, it means the first LED,s will light it up in that RPM range and the last one will light it up when it reaches the shift light point .
*The LED,s strip can be split in 3 different colors, you can choose any color (millions colors) and you can choose how many LED,s per section.
*Four animation’s display: Left to right, right to left, center to out, out to center.
*All the settings are storage in a eprom memory, it means you programed the module just once, no matter if the shift light loose power.
The sequential shift light is very responsive (can be used on a street bike) and the LED,s assembly is light weight, the mounting is performed by a 3M sticky back tape and it get’s glued to the lower cluster trim.
The installation is performed by two T taps terminals, one pick’s up the RPM signal (under the hood) and the other is connected inside cabin for the low beam’s signal ( dim function) . The installation process is not complex, I would say it could take about an hour for the average person and for mechanical /electric skills inclined, could take maybe 30 min.